eXmark Vertex S-Series zero stand-on zero turn mower – The Next Level in Productivity and Profitability
eXmark Vertex S-Series zero stand-on zero turn mower
If you’re looking for the next level in productivity and profitability, look no further than the eXmark Vertex S-Series zero stand-on zero turn mower. With a design that centralizes mass low in the chassis, Vertex is ultra-maneuverable and easy to control. The control panel is ergonomically designed and centrally located to improve operator comfort. Exmark’s proven hydro drive system delivers ground speeds of up to 10mph, enabling Vertex to quickly finish large jobs. Built with a Kawasaki V-Twin and Kohler EFI engine increase fuel efficiency so you can stay out in the field longer. Choose from 48-, 52-, or 60-inch decks – there’s a Vertex for everyone! eXmark Vertex Zero-Turn Mower
The Exmark Vertex S-Series Stand-On Mowers have engineering that minimizes upkeep requirements. They feature no in-season grease points, a single belt transmission, and easy access to the hydro drive components. Exmark also incorporated sealed bearings into these mowers, which require only annual lubrication through the spherical idler bearings. The flat-free semi-pneumatic front tires.
This dedication to durability is backed up with one of the better warranties we’ve seen for a commercial mower. The Exmark Vertex mowers all come with a 4-year/1,250-hour commercial warranty, but you have no hour limit for the first two years.
“What James Briggs Director of Marketing at Exmark Has to Say About the Vertex S-Series Mowers
“Versatility, maneuverability and ease of use are a few of the key reasons more landscape pros are choosing stand-on mowers. The Vertex S-Series delivers in each of these areas. Every detail was considered, researched and exhaustively tested to deliver the performance our customers expect from an Exmark mower.”
Below is the specs on all 4 models of the eXmark Vertex S-Series zero stand-on zero turn mowers
VXS730GKA48400
eXmark Vertex S-Series 23.5 HP Kawasaki FX730V w/ 48″ UltraCut Series 4 Deck
Equipment:
Tractor Frame- Welded, heavy-duty 1.5″ x 2.5″ tubular steel.
Steering Control – Twin levers with center fixed reference bar for ease of control forward and reverse
Front Caster Tires – 13 x 5.0-6, smooth-tread, semipneumatic tires with tapered roller bearings.
Drive Tires – 20×10.0-8 Carlisle Turf Master
Parking Brake – Lever-actuated bar brake.
Blade Spindles – No maintenance, sealed and nongreasable spindles; 7.75″ diameter cutter housing with 1.75″ diameter splined blade driver 1.0″-diameter spindle shaft.
Electrical – 12-volt battery with 15-amp alternator.
Cup Holder – Yes
Casters – .50 thick caster yoke arms with tapered roller bearings
Standard Features – Enhanced Engine Hour Meter
UPC – 193308221793
Power Components:
Engine Brand – Kawasaki
Engine Model – FX730V
Fuel System – Carbureted
Engine Series – V-Twin
Engine Speed – 3,750 rpm
Engine Displacement – 726
Air Filter – Heavy-duty canister air filtration system
Drive System – HYDRO
Drive Description – Two Hydro-Gear 12 cc pumps powering two Parker 14.5 cubic inch motors.
Speed – Infinitely variable speed selection 0–8.5 mph (x.x kmph) forward, 0–x.x mph (x.x kmph) reverse
PTO Engagement – Warner 200 ft-lb clutch
Fuel Capacity – 8-gallon (xx.x-L), single fuel tank on LH side.
Fuel Indicator – Yes – Float Gauge
Drive Wheel Release – Allows unit movement without engine running.
Safety Package – Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift – Single point HOC; with mechanical lift-assist springs.
Carb Compliant – NO
Fuel Type – Gas Carbureted
Decks:
Deck Construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt
Deck Style – Floating Deck
Deck Style Description – Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck – 48″
Cutting Heights – 1.5″ (3.8 cm) to 5.0″ (12.7 cm) in 0.25″ (0.64 cm) increments adjustable from operator’s platform.
Blades – 3 Blades at 16.25″ Length
Blade Tip Speed – Approximately 18,500 fpm.
Dimensions:
Width – 60.05
Length – 65.33
Height – 49.2
Curb Weight – 925
VXS730GKA52400
eXmark Vertex S-Series 23.5 HP Kawasaki FX730V w/ 48″ UltraCut Series 4 Deck
Equipment:
Tractor Frame- Welded, heavy-duty 1.5″ x 2.5″ tubular steel.
Steering Control – Twin levers with center fixed reference bar for ease of control forward and reverse
Front Caster Tires – 13 x 5.0-6, smooth-tread, semipneumatic tires with tapered roller bearings.
Drive Tires – 20×10.0-8 Carlisle Turf Master
Parking Brake – Lever-actuated bar brake.
Blade Spindles – No maintenance, sealed and nongreasable spindles; 7.75″ diameter cutter housing with 1.75″ diameter splined blade driver 1.0″-diameter spindle shaft.
Electrical – 12-volt battery with 15-amp alternator.
Cup Holder – Yes
Casters – .50 thick caster yoke arms with tapered roller bearings
Standard Features – Enhanced Engine Hour Meter
UPC – 193308221809
Power Components:
Engine Brand – Kawasaki
Engine Model – FX730V
Fuel System – Carbureted
Engine Series – V-Twin
Engine Speed – 3,750 rpm
Engine Displacement – 726
Air Filter – Heavy-duty canister air filtration system
Drive System – HYDRO
Drive Description – Two Hydro-Gear 12 cc pumps powering two Parker 14.5 cubic inch motors.
Speed – Infinitely variable speed selection 0–8.5 mph (x.x kmph) forward, 0–x.x mph (x.x kmph) reverse
PTO Engagement – Warner 200 ft-lb clutch
Fuel Capacity – 8-gallon (xx.x-L), single fuel tank on LH side.
Fuel Indicator – Yes – Float Gauge
Drive Wheel Release – Allows unit movement without engine running.
Safety Package – Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift – Single point HOC; with mechanical lift-assist springs.
Carb Compliant – NO
Fuel Type – Gas Carbureted
Decks:
Deck Construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt
Deck Style – Floating Deck
Deck Style Description – Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck – 52″
Cutting Heights – 1.5″ (3.8 cm) to 5.0″ (12.7 cm) in 0.25″ (0.64 cm) increments adjustable from operator’s platform.
Blades – 3 Blades at 18.00″ Length
Blade Tip Speed – Approximately 18,500 fpm.
Dimensions:
Width – 64.79
Length – 65.33
Height – 49.2
Curb Weight – 936
VXS730GKA60400
eXmark Vertex S-Series 23.5 HP Kawasaki FX730V w/ 48″ UltraCut Series 4 Deck
Equipment:
Tractor Frame- Welded, heavy-duty 1.5″ x 2.5″ tubular steel.
Steering Control – Twin levers with center fixed reference bar for ease of control forward and reverse
Front Caster Tires – 13 x 5.0-6, smooth-tread, semipneumatic tires with tapered roller bearings.
Drive Tires – 20×10.0-8 Carlisle Turf Master
Parking Brake – Lever-actuated bar brake.
Blade Spindles – No maintenance, sealed and nongreasable spindles; 7.75″ diameter cutter housing with 1.75″ diameter splined blade driver 1.0″-diameter spindle shaft.
Electrical – 12-volt battery with 15-amp alternator.
Cup Holder – Yes
Casters – .50 thick caster yoke arms with tapered roller bearings
Standard Features – Enhanced Engine Hour Meter
UPC – 193308221816
Power Components:
Engine Brand – Kawasaki
Engine Model – FX730V
Fuel System – Carbureted
Engine Series – V-Twin
Engine Speed – 3,750 rpm
Engine Displacement – 726
Air Filter – Heavy-duty canister air filtration system
Drive System – HYDRO
Drive Description – Two Hydro-Gear 12 cc pumps powering two Parker 14.5 cubic inch motors.
Speed – Infinitely variable speed selection 0–8.5 mph (x.x kmph) forward, 0–x.x mph (x.x kmph) reverse
PTO Engagement – Warner 200 ft-lb clutch
Fuel Capacity – 8-gallon (xx.x-L), single fuel tank on LH side.
Fuel Indicator – Yes – Float Gauge
Drive Wheel Release – Allows unit movement without engine running.
Safety Package – Operator Presence Controls (OPC) with safety interlock system indicators
Deck Lift – Single point HOC; with mechanical lift-assist springs.
Carb Compliant – NO
Fuel Type – Gas Carbureted
Decks:
Deck Construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt
Deck Style – Floating Deck
Deck Style Description – Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck – 60″
Cutting Heights – 1.5″ (3.8 cm) to 5.0″ (12.7 cm) in 0.25″ (0.64 cm) increments adjustable from operator’s platform.
Blades – 3 Blades at 20.50″ Length
Blade Tip Speed – Approximately 18,500 fpm.
Dimensions:
Width – 72.87
Length – 68.24
Height – 49.2
Curb Weight – 978
VXS740EKC52400
eXmark Vertex S-Series 25 HP* Koh EFI ECV740 w/52″ UltraCut Series 4 Deck
Leave a Reply